Alloy A286 (AMS 5731/ AMS 5732 / AMS 5737 / AMS 5525)

Grade US Aerospace/Military US Commercial British Specification European Specification Other
A286 AMS 5525 Sheet / Stirp / Plate
AMS 5723 (cancelled)
AMS 5726 Bar Work Str 200ksi min
AMS 5731 Bar 1800°F Sol Trtd
AMS 5732 Bar 1800°F Sol Trtd /Aged
AMS 5734 Bar 1650°F Sol Trtd
AMS 5737 Bar 1650°F Sol Trtd /Aged
AMS 5853 Bar Cold Red 160ksi min
AMS 5858 Sheet / Strip (welding gr)
AMS 5895 Bar
ASTM A638 660 Type 1
ASTM A638 660 Type 2
ASTM A453 660 Class A
ASTM A453 660 Class B
BS HR51 Bar 1800°F Sol Trtd /Aged
BS HR52 Bar 1800°F Sol Trtd
BS HR560
AECMA PrEN 2171
AECMA PrEN 2119
AECMA PrEN 2172
AECMA PrEN 2173
AECMA PrEN 2303
AECMA PrEN 2304
AECMA PrEN 2398
AECMA PrEN 2399
AECMA PrEN 3510
AECMA PrEN 2175
AECMA PrEN 2417
ws 1.4980
UNS S66286

Technical Data Sheet

Chemical Composition Limits
Weight% C Mn P S Si Cr Ni Mo Ti V Al B Co Cu
A286 0.08 max 2 max 0.025 max 0.025 max 1 max 13.5-16 24-27 1-1.5 1.9-2.35 0.10-0.50 0.35 max 0.0003-0.010 1 max 0.50 max

A286 is an iron-nickel-chromium alloy with additions of molybdenum and titanium. A 286 is one of the most popular high temperature alloys. As one of the austenitic alloys it maintains good strength and oxidation resistance at temperatures up to 1300ºF. Due to it's high strength and excellent fabrication characteristics A286 is used in various components of aircraft and industrial gas turbines. A286 is also widely used in the offshore oil and gas industry where the components are subject to high levels of heat and stress.

Alloy A286 bar can be solution treated at the temperatures detailed below, rapid cooled and then age hardened at 1325ºF (720ºC) for 16 hours and air cooling. The 1800ºF (980ºC) solution treatment produces the highest creep-rupture strength in age-hardened material whereas the 1650ºF (900ºC) treatment results in improved ductility and room temperature strength. If you require further information regarding A286 contact Sales.
   

A286 Solution Treated

A286 Solution Treated is covered by specification AMS 5731 (AMS 5732 Capable) and BS HR52

Solution Heat Treatment: 1800ºF ± 25 (982 ± 14ºC) 1 hour, water/oil quench (AMS)
Hardness: ≥ 217HB or 220 HB (BS), ≥201HB (AMS)

A286 Solution Treated and Aged (1800ºF)

A286 Solution Treated and Aged is covered by specifications AMS 5732, BS HR51, ASTM A638 660 Type 2, ASTM A453 660 Class B

Solution Heat Treatment:
980ºC ± 10 for > 1 hour, followed by air cool (BS)
1800ºF ± 25 (982 ± 14ºC) 1 hour, water/oil quench (AMS)

Precipitation Heat Treatment:
720ºC ± 10 > 16 hours, followed by air cool (BS)
1300-1400 ºF (704-760ºC) hold not less 16 hours, air cool (AMS)

Hardness:
248 - 341 HB or 260 - 360 HV (BS)
248-341 HB (AMS) 

Typical Mechanical Properties

Alloy 0.2 Proof Stress (min) Tensile Strength (min) Elongation (min)
Alloy A286 Solution Treated and Aged (BS) 590 N/mm² 900 N/mm² 13%
Alloy A286 Solution Treated and Aged (AMS) 85 ksi (586 mpa) 130 ksi (896 mpa) 15%

 

A286 Solution Treated and Aged (1650ºF)

A286 Solution Treated and Aged is covered by specifications AMS 5737, ASTM A638 660 Type 1, ASTM A453 660 Class A and EN-2303 (under 4" Bar)

Solution Heat Treatment:
1650ºF ± 25 (899 ± 14ºC) 1 hour, water/oil quench (AMS)

Precipitation Heat Treatment
1300-1400 ºF (704-760ºC) hold not less 16 hours, air cool (AMS)

Hardness
277-363 HB (AMS)

Typical Mechanical Properties

Alloy 0.2 Proof Stress (min) Tensile Strength (min) Elongation (min)
Alloy A286 Solution Treated and Aged (AMS) 95 ksi ( 655mpa) 140 ksi (965 mpa) 12%

 

A286 Other

AMS 5853 - 15% cold reduced (160 ksi/ 1103 Mpa tensile strength)
AMS 5726 - 40-50% cold reduced (200 ksi/ 1379 Mpa tensile strength)

Availability
Alloy A 286 is available in Sheet, Strip, Plate, Round Bar, Flat Bar, Square Bar , Hexagon Bar, Forging stock, Wire and Welding Wire. For all stock availability of contact Sales.

Specifications

AMS 5525 Sheet / Stirp / Plate
AMS 5723 (cancelled)
AMS 5726 Bar Work Str 200ksi min
AMS 5731 Bar 1800°F Sol Trtd
AMS 5732 Bar 1800°F Sol Trtd /Aged
AMS 5734 Bar 1650°F Sol Trtd
AMS 5737 Bar 1650°F Sol Trtd /Aged
AMS 5853 Bar Cold Red 160ksi min
AMS 5858 Sheet / Strip (welding gr)
AMS 5895 Bar
ASTM A638 660 Type 1
ASTM A638 660 Type 2
ASTM A453 660 Class A
ASTM A453 660 Class B
BS HR51 Bar 1800°F Sol Trtd /Aged
BS HR52 Bar 1800°F Sol Trtd
BS HR650
AECMA PrEN 2171
AECMA PrEN 2119
AECMA PrEN 2172
AECMA PrEN 2173
AECMA PrEN 2303
AECMA PrEN 2304
AECMA PrEN 2398
AECMA PrEN 2399
AECMA PrEN 3510
AECMA PrEN 2175
AECMA PrEN 2417
ws 1.4980
UNS S66286


We export Stainless Steel A286 to below contries.

Harsh steel is a major stockist and Exporter of Stainless Steel A286 to many countries of the world such as Singapore, Brisbane, Sydney, Melbourne, Australia, Houston, TX, San Diego, San Francisco, Atlanta, USA, Brentford, United Kingdom, Phoenix, Ireland, New Zealand and Canada, Western Australia , Queensland, New South Wales, South Australia, Victoria, Australian Capital Territory, Tasmania, Northern Territory, Ontario, British Columbia, Yukon Territory, Alberta, Manitoba, Saskatchewan, New foundland, Prince Edward Island, New Brunswick, Nova Scotia, Eastern Cape, Gauteng, Kwazulu-Natal, Western Cape, England, Scotland, Wales, Northern Ireland, Lagos, Abuja Capital Territory, Vadodara, Mumbai, Chennai, New Delhi, Mahape, Gurgaon, Noida, Bangalore, Coimbatore, Cochin, Ash Sharqiyah, Ar Riyad, Makkah, Dhahran, Riyadh, Jiddah, Jeddah, Masqat, Kwazulu-Natal, Gauteng, Western Cape, Free State, Eastern Cape, Alberta, Saskatchewan, British Columbia, Newfoundland, New Brunswick, Manitoba, Ontario, Nova Scotia, Quebec, Calgary, Edmonton, Vancouver, Toronto, Birmingham, Brentford, Manchester, Bristol, Sheffield, Milton Keynes, London, Poplar, Edinburgh, Thames Ditton.


Enquiry for Stainless Steel A286