At Harsh Steel Nickel Alloy K-500/UNS N02200 is available in Monel K-500 wire, Monel K-500 Round bar, Monel K-500 Forged bar, Monel K-500 hex bar, Monel K-500 Flat bar, Monel K-500 Circles, Monel K-500 Ring, Monel K-500 Tube, Monel K-500 seamless Pipe, Monel K-500 Welded / ERW Pipe, Monel K-500 Sheet, Monel K-500 Plate, Monel K-500 Coil, Monel K-500 Flanges, Monel K-500 fasteners, Monel K-500 Socket weld Fittings, Monel K-500 ferrule fittings, Monel K-500 Buttweld fittings like cap, elbow, tee, Reducer. For all stock availability contact Sales.
| Alloy Name | Trade Name | UNS No. | British Specs | American Specs | German Specs |
| Nickel Alloy K500 | Monel K500 | UNS N05500 | BS 3072 BS 3073 BS 3074 BS 3075 BS 3076 NA18 |
AMS 4676 Bar and Forgings QQ-N-286 |
Werkstoff 2.4375 |
Monel K500 is really a precipitation-hardenable nickel-copper alloy that combines the excellent corrosion amount of resistance quality associated with Monel 400 while using the extra benefit from better toughness in addition to hardness. These kinds of increased qualities, toughness in addition to hardness, are usually received by having metal in addition to titanium to the nickel-copper base in addition to with a energy processing utilized to impact precipitation, usually known as age hardening as well as growing old. When within the age-hardened issue, Monel K-500 features a better propensity in the direction of stress-corrosion damage in certain circumstances compared to Monel 400. Alloy K-500 features about 3 x the actual yield toughness in addition to double the actual tensile toughness when compared with alloy 400. Additionally, it could be further strengthened simply by chilly operating just before precipitation hardening. The potency of this particular dime metallic alloy is taken care of to 1200° F but stays on ductile in addition to challenging down to temps associated with 400° F. The reduction range is 2400-2460° F.
This dime alloy is spark resistant in addition to non-magnetic to -200° F. Nevertheless, it's possible to develop a magnet stratum on the surface of the product through processing. Aluminium and copper could possibly be selectively oxidized through heat, leaving a new magnet dime rich movie on the exterior. Pickling as well as shiny sinking inside p can certainly take out this particular magnet film in addition to reestablish the actual non-magnetic qualities.
The corrosion resistance of alloy K-500 is substantially equivalent to that of alloy 400 except that when in the age-hardened condition, nickel alloy K-500 has a greater tendency toward stress-corrosion cracking in some environments. Monel K-500 has been found to be resistant to a sour-gas environment. The alloy of very low corrosion rates in high-velocity sear water and high strength make alloy K-500 particularly suitable for shafts of centrifugal pumps in marine service. In stagnant or slow-moving sea water, fouling may occur followed by pitting but this pitting slows down after a fairly rapid initial attack.
| Chemical Composition Limits | |||||||||
| Weight% | Ni+Co | C | Mn | Fe | S | Si | Cu | Al | Ti |
| K-500 | 63 min | 0.25 max | 1.5 max | 2 max | 0.01 max | 0.5 max | 27-33 | 2.3-3.15 | 0.35-0.85 |
| Material | Form and Condition | Tensile Strength MPa | Yield Strength (0.2% Offset) MPa | Elongation (%) | Hardness Rockwell B |
| Monel K500 Rod and Bar | Cold Drawn Annealed | 621-758 | 276-414 | 50-25 | 75-90B |
| Monel K500 Rod and Bar | Cold-Drawn Annealed and Aged | 896-1310 | 586-827 | 30-20 | 24-35C |
| Monel K500 Sheet | BS3072 NA18, QQ-N-286, DIN 17750, ISO 6208 |
| Monel K500 Plate | BS3072 NA18, QQ-N-286, DIN 17750, ISO 6208 |
| Monel K500 Strip | ASTM B 162, ASME SB 162, DIN 17750, ISO 6208 |
| Monel K500 Bar | BS3072 NA18, QQ-N-286, DIN 17750, ISO 6208 |
| Monel K500 Rod | AMS 4676, BS076 NA18, ASTM B 865, DIN 17752, QQ-N-286, ISO 9723 |
| Monel K500 Wire | AMS 4676, ISO 6208, ASTM B 865, DIN 17752, QQ-N-286 |
| Monel K500 Forging | ASTM B 546, ASME SB 564, ISO 9725, DIN 17754 |
| Monel K500 Other | Trade name Monel Alloy K-500, Werkstoff Nr. 2.4375, MIL-N-24549, NACE MR-01-75 |
Harsh steel is a major stockist and Exporter of Monel K500 to many countries of the world such as Singapore, Brisbane, Sydney, Melbourne, Australia, Houston, TX, San Diego, San Francisco, Atlanta, USA, Brentford, United Kingdom, Phoenix, Ireland, New Zealand and Canada, Western Australia , Queensland, New South Wales, South Australia, Victoria, Australian Capital Territory, Tasmania, Northern Territory, Ontario, British Columbia, Yukon Territory, Alberta, Manitoba, Saskatchewan, Newfoundland, Prince Edward Island, New Brunswick, Nova Scotia, Eastern Cape, Gauteng, Kwazulu-Natal, Western Cape, England, Scotland, Wales, Northern Ireland, Lagos, Abuja Capital Territory, Vadodara, Mumbai, Chennai, New Delhi, Mahape, Gurgaon, Noida, Bangalore, Coimbatore, Cochin, Ash Sharqiyah, Ar Riyad, Makkah, Dhahran, Riyadh, Jiddah, Jeddah, Masqat, Kwazulu-Natal, Gauteng, Western Cape, Free State, Eastern Cape, Alberta, Saskatchewan, British Columbia, Newfoundland, New Brunswick, Manitoba, Ontario, Nova Scotia, Quebec, Calgary, Edmonton, Vancouver, Toronto, Birmingham, Brentford, Manchester, Bristol, Sheffield, Milton Keynes, London, Poplar, Edinburgh, Thames Ditton.